Welcome visitor you can login or create an account.

Search
0 item(s) View Cart
Your shopping cart is empty!
 
 
 
 
 
 

DE230P

OpenVox DE230P is now the leading 2 port T1/E1/J1 PCI card in the open source industry. It takes full advantage of Octasic® Hardware Echo Cancellation Module to deliver the superior voice quality over T1, E1, and J1 interface. ... More »

Brand: OpenVox
Product Code: OpenVox
Availability: In Stock
Ask Product Question
Price: $1,199.00
Qty:  
   - OR -   
 

OpenVox DE230P is now the leading 2 port T1/E1/J1 PCI card in the open source industry. It takes full advantage of Octasic® Hardware Echo Cancellation Module to deliver the superior voice quality over T1, E1, and J1 interface.

    Industry 1st adjustable interrupt routing design
    Interrupts frequency adjustment
    Compatible with All Commercially Available Motherboards
    2 T1/E1/J1 ports with PCI interface for high performance voice and data applications
    Octasic® Hardware Echo Cancellation Module Available
    3-Month “No Questions Asked” Return Policy
    Lifetime warranty

    Overview

    The DE230P is an upgrade product of the DE210P. It’s supposed to be the most advanced 2 port T1/E1/J1 asterisk® card with superior quality in the open source community. The leading innovation ensures users to adjust the interrupts frequency to reduce the CPU load up to 70% and adjust the interrupt number to avoid interrupt number sharing or conflict.

    DE230P offers an on-board Octasic® DSP-based echo cancellation module. It supports T1, E1, and J1 environments and is selectable on a per-card or per-port basis. The Octasic® DSP-based EC module enables users to eliminate echo tails up to 128ms or 1024 taps across all 64 channels in E1 mode or 48 channels in T1/J1 modes. Further, this module takes advantage of the Octasic® Voice Quality Enhancement to provide superior sound quality on all calls.

    DE230P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported.

    DE230P works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.

    Target Applications
    Voice-over Internet Protocol (VoIP) Services
    Complex IVR Trees
    "Meet-Me" Bridge Conferencing
    Calling Card Platforms
    VoIP Gateways (support SIP, H.323, and IAX)
    Legacy PBX/IVR Services
    Voice/Data Router (replace expensive routers)
    PRI/Switch Compatibility - Network or CPE

    Technical Specifications
    2 T1/E1/J1 ports with PCI interface for high performance voice and data applications
    Half-length PRI card
    RJ48 connector
    Low profile option
    32 bit 33MHz PCI and fully PCI 2.3 compliant
    32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec
    Autosense compatibility with 5 V and 3.3 V PCI busses
    FPGA design, upgradeable firmware onsite
    Power: 2.3W Minimum, 3.5W Maximum at 3.3 V or 5 V.
    Operation temperature: 0°C to 50°C
    Storage temperature: -65°C to 125°C
    Dimension: 2U Form factor: 12*6.4*1.8cm
    Weight: 94g

    Optional Octasic® DSP Echo Cancellation Module—EC2064
    128ms tail/channel (on all channel densities)
    Octasic® Music Protection
    Adaptive Noise Reduction
    Automatic Level Control (G.169)
    Field upgradeable algorithm
    V.25 / V.8 answer tone (w/ and w/o phase reversal)
    DTMF as per Q.24
    No CPU load as a result of echo cancellation.
    Does not increase the physical size of the card, and no additional slot is required
    EC2064 power: 0.33W/3.5W
    Storage temperature: -40°C to 75°C

    PRI Switch Compatibility
    EuroISDN (PRI or PRA) - Q.931/Q.921
    Network or CPE
    AT&T 4ESS
    National ISDN 2
    CAS Voice Modes
    DMS 100
    Lucent 5E

    Operating Systems
    Linux (all versions, releases and distributions f rom 1.0 up)

    Minimum Hardware Requirement
    800-Mhz Pentium III
    128MB RAM
    Available PCI Slot

 

Write a review

Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Comment ()