Welcome visitor you can login or create an account.

Search
0 item(s) View Cart
Your shopping cart is empty!
 
 
 
 
 
 

DE210P

OpenVox DE210P takes full advantage of Octasic® Hardware Echo Cancellation Module to deliver the superior voice quality over T1, E1, and J1 in all 2 ports.     Two T1/E1/J1 ports with PCI interface for high perf... More »

Brand: OpenVox
Product Code: OpenVox
Availability: In Stock
Ask Product Question
Price: $999.00
Qty:  
   - OR -   
 

OpenVox DE210P takes full advantage of Octasic® Hardware Echo Cancellation Module to deliver the superior voice quality over T1, E1, and J1 in all 2 ports.

    Two T1/E1/J1 ports with PCI interface for high performance voice and data applications
    Octasic® Hardware Echo Cancellation Module Available
    Up to 60 Simultaneous voice calls
    3-Month "No Questions Asked" Return Policy

    Overview

    The DE210P offers an on-board Octasic® DSP-based echo cancellation module. It supports T1, E1, and J1 environments and is selectable on a per-card or per-port basis. The Octasic® DSP-based EC module enables users to eliminate echo tails up to 128ms or 1024 taps across all 64 channels in E1 mode or 48 channels in T1/J1 modes. Further, this module takes advantage of the Octasic® Voice Quality Enhancement to provide superior sound quality on all calls.

    DE210P supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported.

    DE210P works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.

    Target Applications
    Voice-over Internet Protocol (VoIP) Services
    Complex IVR Trees
    "Meet-Me" Bridge Conferencing
    Calling Card Platforms
    VoIP Gateways (support SIP, H.323, and IAX)
    Legacy PBX/IVR Services
    Voice/Data Router (replace expensive routers)
    PRI/Switch Compatibility - Network or CPE

    Technical Specifications
    Two T1/E1/J1 ports with PCI interface for high performance voice and data applications
    Half-length PRI card
    RJ48 connector
    32 bit 33MHz PCI and fully PCI 2.3 compliant
    32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec
    Autosense compatibility with 5 V and 3.3 V PCI busses
    Power: 2.3W Minimum, 3.5W Maximum at 3.3 V or 5 V.
    Operation temperature: 0°C to 50°C
    Storage temperature: -65°C to 125°C
    Dimension: 12.9cm*10.3cm*2cm
    Weight: 106g

    Optional Octasic® DSP Echo Cancellation Module?EC100-64
    128ms tail/channel (on all channel densities)
    Octasic® Music Protection
    Adaptive Noise Reduction
    Automatic Level Control (G.169)
    Field upgradeable algorithm
    V.25 / V.8 answer tone (w/ and w/o phase reversal)
    DTMF as per Q.24
    No CPU load as a result of echo cancellation.
    Does not increase the physical size of the card, and no additional slot is required
    EC100-64 power: 0.33W/3.5W
    Storage temperature: -40°C to 75°C

    PRI Switch Compatibility
    EuroISDN (PRI or PRA) - Q.931/Q.921
    Network or CPE
    AT&T 4ESS
    National ISDN 2
    CAS Voice Modes
    DMS 100
    Lucent 5E

    Operating Systems---Linux

Minimum Hardware Requirement

    800-Mhz Pentium III
    128MB RAM
    Available PCI Slot

    RoHS compliant
    Certificates: CE and FCC
    Five Year Warranty!

 

Write a review

Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Comment ()